Convert Ohm-Centimeters to Milliohm-Meter (Ω·cm to mΩ·m)

To achieve the desired result as quickly as possible, it is best to enter the value to be converted as text, for example '463 Ωcm to mΩm' or '463 Ωcm into mΩm' or simply '463 Ωcm':

In most cases, the word 'to' (or '=' / '->') can be omitted between the names of the two units, for example '463 Ωcm mΩm' instead of '463 Ωcm to mΩm'.
The basic operations of arithmetic: square root (√), pi (π), exponent (^), addition (+), division (/, :, ÷), brackets, subtraction (-) and multiplication (*, x) are all permitted at this point
Instead of the Greek letter 'µ' (= micro), a simple 'u' can be used, for example uPa instead of µPa.
In the abbreviations for 'square' and 'cubic', the '^' character can be omitted from '^2' and '^3'. Square centimetres can therefore be written cm2 instead of cm^2.
Instead of 1.03 x 10^5, 1.03e5 can be written. The 'e' stands for 'exponent'.

or: Using the calculator with the selection lists

Choose the right category from the selection list, in this case 'Specific electrical resistance'.
Next enter the value you want to convert.
From the selection list, choose the unit that corresponds to the value you want to convert, in this case 'Ohm-Centimeters [Ω·cm]'.
Finally choose the unit you want the value to be converted to, in this case 'Milliohm-Meter [mΩ·m]'.

Use the full power of this unit converter to convert Ωcm to mΩm

With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '451 Ohm-Centimeters'. In so doing, either the full name of the unit or its abbreviation can be usedas an example, either 'Ohm-Centimeters' or 'Ωcm'. Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Specific electrical resistance'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Alternatively, the value to be converted can be entered as follows: '1 Ωcm to mΩm' or '1 Ωcm into mΩm' or '1 Ohm-Centimeters -> Milliohm-Meter' or '1 Ωcm = mΩm' or '1 Ohm-Centimeters to mΩm' or '1 Ωcm to Milliohm-Meter' or '1 Ohm-Centimeters into Milliohm-Meter'. For this alternative, the calculator also figures out immediately into which unit the original value is specifically to be converted. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.

If required, the result can be rounded to a certain number of decimal places wherever it makes sense.
If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 1.234 567 89×1015. For this form of presentation, the number will be segmented into an exponent, here 15, and the actual number, here 1.234 567 89. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 1.234 567 89E+15. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 1 234 567 890 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.
Instead of '√16' you can also write 'sqrt 16'.
Instead of '4^3' you can also write '4 exp 3' or '4 pow 3'.
The mathematical functions acos, tan, sqrt, atan, pow, asin, cos, exp and sin can also be used. Example: 3 pow 2, atan(1/4), cos(pi/2), sin(π/2), sqrt(4), sin(90), tan(90°), 2 exp 3, asin(1/2) or acos(1)
Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '1 * 1 Ωcm'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '1 Ohm-Centimeters + 1 Milliohm-Meter' or '1mm x 1cm x 1dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.