Convert Hour-Square meter-Celsius per Calories to Kelvin-Square meter per Watt (h·m²·°C/cal to K·m²/W)

To achieve the desired result as quickly as possible, it is best to enter the value to be converted as text, for example '391 hm2°C/cal to Km2/W' or '391 hm2°C/cal into Km2/W' or simply '391 hm2°C/cal':

In most cases, the word 'to' (or '=' / '->') can be omitted between the names of the two units, for example '391 hm2°C/cal Km2/W' instead of '391 hm2°C/cal to Km2/W'.
In the abbreviations for 'square' and 'cubic', the '^' character can be omitted from '^2' and '^3'. Square centimetres can therefore be written cm2 instead of cm^2.
Instead of the Greek letter 'µ' (= micro), a simple 'u' can be used, for example uPa instead of µPa.
The basic operations of arithmetic: multiplication (*, x), pi (π), addition (+), exponent (^), subtraction (-), square root (√), division (/, :, ÷) and brackets are all permitted at this point
Instead of 1.93 x 10^5, 1.93e5 can be written. The 'e' stands for 'exponent'.

or: Using the calculator with the selection lists

Choose the right category from the selection list, in this case 'Thermal insulance (R-value)'.
Next enter the value you want to convert.
From the selection list, choose the unit that corresponds to the value you want to convert, in this case 'Hour-Square meter-Celsius per Calories [h·m²·°C/cal]'.
Finally choose the unit you want the value to be converted to, in this case 'Kelvin-Square meter per Watt [K·m²/W]'.

Use the full power of this unit converter to convert hm2°C/cal to Km2/W

With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '379 Hour-Square meter-Celsius per Calories'. In so doing, either the full name of the unit or its abbreviation can be usedas an example, either 'Hour-Square meter-Celsius per Calories' or 'hm2°C/cal'. Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Thermal insulance (R-value)'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Alternatively, the value to be converted can be entered as follows: '91 hm2°C/cal to Km2/W' or '19 hm2°C/cal into Km2/W' or '37 Hour-Square meter-Celsius per Calories -> Kelvin-Square meter per Watt' or '82 hm2°C/cal = Km2/W' or '28 Hour-Square meter-Celsius per Calories to Km2/W' or '73 hm2°C/cal to Kelvin-Square meter per Watt' or '64 Hour-Square meter-Celsius per Calories into Kelvin-Square meter per Watt'. For this alternative, the calculator also figures out immediately into which unit the original value is specifically to be converted. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.

Instead of '√25' you can also write 'sqrt 25'.
If required, the result can be rounded to a certain number of decimal places wherever it makes sense.
If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 1.079 012 335 86×1019. For this form of presentation, the number will be segmented into an exponent, here 19, and the actual number, here 1.079 012 335 86. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 1.079 012 335 86E+19. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 10 790 123 358 600 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.
The mathematical functions cos, sin, atan, acos, asin, sqrt, exp, tan and pow can also be used. Example: acos(1), 3 pow 2, sqrt(4), sin(90), tan(90°), 2 exp 3, cos(pi/2), asin(1/2), atan(1/4) or sin(π/2)
Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '91 * 37 hm2°C/cal'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '1 Hour-Square meter-Celsius per Calories + 46 Kelvin-Square meter per Watt' or '82mm x 28cm x 73dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.
Instead of '4^3' you can also write '4 exp 3' or '4 pow 3'.