# Convert Torr (Pressure)

- Choose the right category from the selection list, in this case 'Pressure'.
- Next enter the value you want to convert. The basic operations of arithmetic: addition (+), subtraction (-), multiplication (*, x), division (/, :, ÷), exponent (^), square root (√), brackets and π (pi) are all permitted at this point.
- From the selection list, choose the unit that corresponds to the value you want to convert, in this case '
**Torr**'. - The value will then be converted into all units of measurement the calculator is familiar with.
- Then, when the result appears, there is still the possibility of rounding it to a specific number of decimal places, whenever it makes sense to do so.

### Utilize the full range of performance for this units calculator

With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '**422 Torr**'. In so doing, either the full name of the unit or its abbreviation can be used Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Pressure'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.

Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '**(96 * 50) Torr**'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '**89 Torr + 43 Torr**' or '4mm x 57cm x 11dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.

The mathematical functions sin, cos, tan and sqrt can also be used. Example: sin(π/2), cos(pi/2), tan(90°), sin(90) or sqrt(4).

If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 5.352 459 951 292 6×1022. For this form of presentation, the number will be segmented into an exponent, here 22, and the actual number, here 5.352 459 951 292 6. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 5.352 459 951 292 6E+22. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 53 524 599 512 926 000 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.

- Convert Torr to µPa (Torr to Micropascal)
- Convert Torr to mPa (Torr to Millipascal)
- Convert Torr to Pa (Torr to Pascal)
- Convert Torr to hPa (Torr to Hectopascal)
- Convert Torr to kPa (Torr to Kilopascal)
- Convert Torr to MPa (Torr to Megapascal)
- Convert Torr to GPa (Torr to Gigapascal)
- Convert Torr to N/m²
- Convert Torr to kN/m²
- Convert Torr to MN/m²
- Convert Torr to N/dm²
- Convert Torr to kN/dm²
- Convert Torr to N/cm²
- Convert Torr to kN/cm²
- Convert Torr to N/mm²
- Convert Torr to kN/mm²
- Convert Torr to mBar (Torr to Millibar)
- Convert Torr to Bar
- Convert Torr to µmHg (Torr to Micrometer of mercury)
- Convert Torr to mmHg (Torr to Millimeter of mercury)
- Convert Torr to cmHg (Torr to Centimeter of mercury)
- Convert Torr to ftHg (Torr to Foot of mercury)
- Convert Torr to inHg (Torr to Inch of mercury)
- Convert Torr to at (Torr to Technical atmosphere)
- Convert Torr to atm (Torr to Physical atmosphere)
- Convert Torr to psf (Torr to Pound per square foot)
- Convert Torr to psi (Torr to Pound per square inch)
- Convert Torr to ksi (Torr to Kilopound per square inch)
- Convert Torr to Poundal per square foot
- Convert Torr to Short ton per square foot
- Convert Torr to kgf/mm² (Torr to Kilogram-force per square millimeter)
- Convert Torr to ksc (Torr to Kilogram-force per square centimeter)
- Convert Torr to kgf/dm² (Torr to Kilogram-force per square decimeter)
- Convert Torr to kgf/m² (Torr to Kilogram-force per square meter)
- Convert Torr to mmH2O (Torr to Millimeter of water column)
- Convert Torr to cmH2O (Torr to Centimeter of water column)
- Convert Torr to dmH2O (Torr to Decimeter of water column)
- Convert Torr to mH2O (Torr to Meter of water column)
- Convert Torr to ftH2O (Torr to Foot of water column)
- Convert Torr to inH2O (Torr to Inch of water column)
- Convert Torr to Ba (Torr to Barye)
- Convert Torr to pz (Torr to Pièze)
- Convert Torr to Planck pressure