Convert Stokes to Square centimeter per Second (St to cm²/s)

To achieve the desired result as quickly as possible, it is best to enter the value to be converted as text, for example '394 St to cm2/s' or '394 St into cm2/s' or simply '394 St':

In most cases, the word 'to' (or '=' / '->') can be omitted between the names of the two units, for example '394 St cm2/s' instead of '394 St to cm2/s'.
Instead of the Greek letter 'µ' (= micro), a simple 'u' can be used, for example uPa instead of µPa.
Instead of 1.78 x 10^5, 1.78e5 can be written. The 'e' stands for 'exponent'.
In the abbreviations for 'square' and 'cubic', the '^' character can be omitted from '^2' and '^3'. Square centimetres can therefore be written cm2 instead of cm^2.
The basic operations of arithmetic: exponent (^), subtraction (-), division (/, :, ÷), addition (+), square root (√), multiplication (*, x), brackets and pi (π) are all permitted at this point

or: Using the calculator with the selection lists

Choose the right category from the selection list, in this case 'Kinematic viscosity'.
Next enter the value you want to convert.
From the selection list, choose the unit that corresponds to the value you want to convert, in this case 'Stokes [St]'.
Finally choose the unit you want the value to be converted to, in this case 'Square centimeter per Second [cm²/s]'.

Use the full power of this unit converter to convert St to cm2/s

With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '382 Stokes'. In so doing, either the full name of the unit or its abbreviation can be usedas an example, either 'Stokes' or 'St'. Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Kinematic viscosity'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Alternatively, the value to be converted can be entered as follows: '76 St to cm2/s' or '16 St into cm2/s' or '64 Stokes -> Square centimeter per Second' or '52 St = cm2/s' or '40 Stokes to cm2/s' or '28 St to Square centimeter per Second' or '4 Stokes into Square centimeter per Second'. For this alternative, the calculator also figures out immediately into which unit the original value is specifically to be converted. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.

If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 1.492 197 517 285 2×1022. For this form of presentation, the number will be segmented into an exponent, here 22, and the actual number, here 1.492 197 517 285 2. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 1.492 197 517 285 2E+22. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 14 921 975 172 852 000 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.
Instead of '4^3' you can also write '4 exp 3' or '4 pow 3'.
Instead of '√16' you can also write 'sqrt 16'.
Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '43 * 31 St'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '67 Stokes + 55 Square centimeter per Second' or '19mm x 7cm x 94dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.
The mathematical functions asin, exp, sqrt, pow, atan, cos, tan, sin and acos can also be used. Example: sin(π/2), cos(pi/2), sin(90), 2 exp 3, sqrt(4), tan(90°), 3 pow 2, acos(1), asin(1/2) or atan(1/4)
If required, the result can be rounded to a certain number of decimal places wherever it makes sense.