Convert Sievert per hour (Sv/h)
To achieve the desired result as quickly as possible, it is best to enter the value to be converted as text, for example '489 Sv/h to nSv/s' or '489 Sv/h into nSv/s' or simply '489 Sv/h':
- In most cases, the word 'to' (or '=' / '->') can be omitted between the names of the two units, for example '489 Sv/h nSv/s' instead of '489 Sv/h to nSv/s'.
- In the abbreviations for 'square' and 'cubic', the '^' character can be omitted from '^2' and '^3'. Square centimetres can therefore be written cm2 instead of cm^2.
- The basic operations of arithmetic: division (/, :, ÷), exponent (^), addition (+), brackets, multiplication (*, x), square root (√), pi (π) and subtraction (-) are all permitted at this point
- Instead of 1.38 x 10^5, 1.38e5 can be written. The 'e' stands for 'exponent'.
- Instead of the Greek letter 'µ' (= micro), a simple 'u' can be used, for example uPa instead of µPa.
or: Using the calculator with the selection lists
- Choose the right category from the selection list, in this case 'Radiation dose'.
- Next enter the value you want to convert.
- From the selection list, choose the unit that corresponds to the value you want to convert, in this case 'Sievert per hour [Sv/h]'.
- The value will then be converted into all units of measurement the calculator is familiar with.
Use the full power of this unit converter to convert Sv/h
With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '477 Sievert per hour'. In so doing, either the full name of the unit or its abbreviation can be usedas an example, either 'Sievert per hour' or 'Sv/h'. Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Radiation dose'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.
- Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '80 * 48 Sv/h'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '45 Sievert per hour + 13 Sievert per hour' or '16mm x 83cm x 51dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.
- If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 2.087 222 203 228 5×1022. For this form of presentation, the number will be segmented into an exponent, here 22, and the actual number, here 2.087 222 203 228 5. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 2.087 222 203 228 5E+22. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 20 872 222 032 285 000 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.
- The mathematical functions atan, exp, sin, sqrt, tan, acos, asin, cos and pow can also be used. Example: sqrt(4), asin(1/2), acos(1), 2 exp 3, sin(π/2), sin(90), atan(1/4), cos(pi/2), tan(90°) or 3 pow 2
- Instead of '√16' you can also write 'sqrt 16'.
- Instead of '4^3' you can also write '4 exp 3' or '4 pow 3'.
- If required, the result can be rounded to a certain number of decimal places wherever it makes sense.
- Convert Sv/h to Natural background radiation (Sievert per hour to Natural background radiation)
- Convert Sv/h to Annual limit (ICRP) (Sievert per hour to Annual limit (ICRP))
- Convert Sv/h to nSv/s (Sievert per hour to Nanosievert per second)
- Convert Sv/h to nSv/h (Sievert per hour to Nanosievert per hour)
- Convert Sv/h to nSv/y (Sievert per hour to Nanosievert per year)
- Convert Sv/h to µSv/s (Sievert per hour to Microsievert per second)
- Convert Sv/h to µSv/h (Sievert per hour to Microsievert per hour)
- Convert Sv/h to µSv/y (Sievert per hour to Microsievert per year)
- Convert Sv/h to mSv/s (Sievert per hour to Millisievert per second)
- Convert Sv/h to mSv/h (Sievert per hour to Millisievert per hour)
- Convert Sv/h to mSv/y (Sievert per hour to Millisievert per year)
- Convert Sv/h to Sv/s (Sievert per hour to Sievert per second)
- Convert Sv/h to Sv/y (Sievert per hour to Sievert per year)
- Convert Sv/h to rem/s (Sievert per hour to Rem per second)
- Convert Sv/h to rem/h (Sievert per hour to Rem per hour)
- Convert Sv/h to rem/y (Sievert per hour to Rem per year)
- Convert Sv/h to Gy/s (Sievert per hour to Gray per second)
- Convert Sv/h to Gy/h (Sievert per hour to Gray per hour)
- Convert Sv/h to Gy/y (Sievert per hour to Gray per year)