# Convert N/mm² (Pressure):

- Choose the right category from the selection list, in this case 'Pressure'.
- Next enter the value you want to convert. The basic operations of arithmetic: addition (+), subtraction (-), multiplication (*, x), division (/, :, ÷), exponent (^), square root (√), brackets and π (pi) are all permitted at this point.
- From the selection list, choose the unit that corresponds to the value you want to convert, in this case '
**N/mm²**'. - The value will then be converted into all units of measurement the calculator is familiar with.
- Then, when the result appears, there is still the possibility of rounding it to a specific number of decimal places, whenever it makes sense to do so.

With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '**557 N/mm2**'. In so doing, either the full name of the unit or its abbreviation can be used. Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Pressure'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.

Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '**(51 * 32) N/mm2**'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '**89 N/mm2 + 70 N/mm2**' or '13mm x 93cm x 74dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.

The mathematical functions sin, cos, tan and sqrt can also be used. Example: sin(π/2), cos(pi/2), tan(90°), sin(90) or sqrt(4).

If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 3.054 479 972 204 2×1022. For this form of presentation, the number will be segmented into an exponent, here 22, and the actual number, here 3.054 479 972 204 2. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 3.054 479 972 204 2E+22. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 30 544 799 722 042 000 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.

- Convert N/mm² to µPa (N/mm² to Micropascal)
- Convert N/mm² to mPa (N/mm² to Millipascal)
- Convert N/mm² to Pa (N/mm² to Pascal)
- Convert N/mm² to hPa (N/mm² to Hectopascal)
- Convert N/mm² to kPa (N/mm² to Kilopascal)
- Convert N/mm² to MPa (N/mm² to Megapascal)
- Convert N/mm² to GPa (N/mm² to Gigapascal)
- Convert N/mm² to N/m²
- Convert N/mm² to kN/m²
- Convert N/mm² to MN/m²
- Convert N/mm² to N/dm²
- Convert N/mm² to kN/dm²
- Convert N/mm² to N/cm²
- Convert N/mm² to kN/cm²
- Convert N/mm² to kN/mm²
- Convert N/mm² to mBar (N/mm² to Millibar)
- Convert N/mm² to Bar
- Convert N/mm² to Torr
- Convert N/mm² to µmHg (N/mm² to Micrometer of mercury)
- Convert N/mm² to mmHg (N/mm² to Millimeter of mercury)
- Convert N/mm² to cmHg (N/mm² to Centimeter of mercury)
- Convert N/mm² to ftHg (N/mm² to Foot of mercury)
- Convert N/mm² to inHg (N/mm² to Inch of mercury)
- Convert N/mm² to at (N/mm² to Technical atmosphere)
- Convert N/mm² to atm (N/mm² to Physical atmosphere)
- Convert N/mm² to psf (N/mm² to Pound per square foot)
- Convert N/mm² to psi (N/mm² to Pound per square inch)
- Convert N/mm² to ksi (N/mm² to Kilopound per square inch)
- Convert N/mm² to Poundal per square foot
- Convert N/mm² to Short ton per square foot
- Convert N/mm² to kgf/mm² (N/mm² to Kilogram-force per square millimeter)
- Convert N/mm² to ksc (N/mm² to Kilogram-force per square centimeter)
- Convert N/mm² to kgf/dm² (N/mm² to Kilogram-force per square decimeter)
- Convert N/mm² to kgf/m² (N/mm² to Kilogram-force per square meter)
- Convert N/mm² to mmH2O (N/mm² to Millimeter of water column)
- Convert N/mm² to cmH2O (N/mm² to Centimeter of water column)
- Convert N/mm² to dmH2O (N/mm² to Decimeter of water column)
- Convert N/mm² to mH2O (N/mm² to Meter of water column)
- Convert N/mm² to ftH2O (N/mm² to Foot of water column)
- Convert N/mm² to inH2O (N/mm² to Inch of water column)
- Convert N/mm² to Ba (N/mm² to Barye)
- Convert N/mm² to pz (N/mm² to Pièze)
- Convert N/mm² to Planck pressure