Convert Mole per cubic decimeter to Nanomole per cubic decimeter (mol/dm³ to nmol/dm³)

To achieve the desired result as quickly as possible, it is best to enter the value to be converted as text, for example '729 mol/dm3 to nmol/dm3' or '729 mol/dm3 into nmol/dm3' or simply '729 mol/dm3':

In most cases, the word 'to' (or '=' / '->') can be omitted between the names of the two units, for example '729 mol/dm3 nmol/dm3' instead of '729 mol/dm3 to nmol/dm3'.
In the abbreviations for 'square' and 'cubic', the '^' character can be omitted from '^2' and '^3'. Square centimetres can therefore be written cm2 instead of cm^2.
Instead of 1.71 x 10^5, 1.71e5 can be written. The 'e' stands for 'exponent'.
Instead of the Greek letter 'µ' (= micro), a simple 'u' can be used, for example uPa instead of µPa.
The basic operations of arithmetic: addition (+), multiplication (*, x), brackets, square root (√), subtraction (-), division (/, :, ÷), exponent (^) and pi (π) are all permitted at this point

or: Using the calculator with the selection lists

Choose the right category from the selection list, in this case 'Molar concentration'.
Next enter the value you want to convert.
From the selection list, choose the unit that corresponds to the value you want to convert, in this case 'Mole per cubic decimeter [mol/dm³]'.
Finally choose the unit you want the value to be converted to, in this case 'Nanomole per cubic decimeter [nmol/dm³]'.

Use the full power of this unit converter to convert mol/dm3 to nmol/dm3

With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '717 Mole per cubic decimeter'. In so doing, either the full name of the unit or its abbreviation can be usedas an example, either 'Mole per cubic decimeter' or 'mol/dm3'. Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Molar concentration'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Alternatively, the value to be converted can be entered as follows: '69 mol/dm3 to nmol/dm3' or '41 mol/dm3 into nmol/dm3' or '4 Mole per cubic decimeter -> Nanomole per cubic decimeter' or '38 mol/dm3 = nmol/dm3' or '72 Mole per cubic decimeter to nmol/dm3' or '7 mol/dm3 to Nanomole per cubic decimeter' or '75 Mole per cubic decimeter into Nanomole per cubic decimeter'. For this alternative, the calculator also figures out immediately into which unit the original value is specifically to be converted. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.

If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 9.167 407 323 984 ×1021. For this form of presentation, the number will be segmented into an exponent, here 21, and the actual number, here 9.167 407 323 984. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 9.167 407 323 984 E+21. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 9 167 407 323 984 000 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.
If required, the result can be rounded to a certain number of decimal places wherever it makes sense.
Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '47 * 81 mol/dm3'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '78 Mole per cubic decimeter + 13 Nanomole per cubic decimeter' or '16mm x 50cm x 84dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.
The mathematical functions atan, pow, acos, exp, asin, sin, sqrt, cos and tan can also be used. Example: tan(90°), sin(π/2), acos(1), cos(pi/2), atan(1/4), sin(90), 3 pow 2, 2 exp 3, sqrt(4) or asin(1/2)
Instead of '4^3' you can also write '4 exp 3' or '4 pow 3'.
Instead of '√16' you can also write 'sqrt 16'.