Convert Millimole per cubic decimeter to Picomole per cubic meter (mmol/dm³ to pmol/m³)

To achieve the desired result as quickly as possible, it is best to enter the value to be converted as text, for example '801 mmol/dm3 to pmol/m3' or '801 mmol/dm3 into pmol/m3' or simply '801 mmol/dm3':

In most cases, the word 'to' (or '=' / '->') can be omitted between the names of the two units, for example '801 mmol/dm3 pmol/m3' instead of '801 mmol/dm3 to pmol/m3'.
Instead of the Greek letter 'µ' (= micro), a simple 'u' can be used, for example uPa instead of µPa.
In the abbreviations for 'square' and 'cubic', the '^' character can be omitted from '^2' and '^3'. Square centimetres can therefore be written cm2 instead of cm^2.
The basic operations of arithmetic: pi (π), division (/, :, ÷), brackets, addition (+), square root (√), exponent (^), subtraction (-) and multiplication (*, x) are all permitted at this point
Instead of 1.98 x 10^5, 1.98e5 can be written. The 'e' stands for 'exponent'.

or: Using the calculator with the selection lists

Choose the right category from the selection list, in this case 'Molar concentration'.
Next enter the value you want to convert.
From the selection list, choose the unit that corresponds to the value you want to convert, in this case 'Millimole per cubic decimeter [mmol/dm³]'.
Finally choose the unit you want the value to be converted to, in this case 'Picomole per cubic meter [pmol/m³]'.

Use the full power of this unit converter to convert mmol/dm3 to pmol/m3

With this calculator, it is possible to enter the value to be converted together with the original measurement unit; for example, '789 Millimole per cubic decimeter'. In so doing, either the full name of the unit or its abbreviation can be usedas an example, either 'Millimole per cubic decimeter' or 'mmol/dm3'. Then, the calculator determines the category of the measurement unit of measure that is to be converted, in this case 'Molar concentration'. After that, it converts the entered value into all of the appropriate units known to it. In the resulting list, you will be sure also to find the conversion you originally sought. Alternatively, the value to be converted can be entered as follows: '96 mmol/dm3 to pmol/m3' or '86 mmol/dm3 into pmol/m3' or '94 Millimole per cubic decimeter -> Picomole per cubic meter' or '92 mmol/dm3 = pmol/m3' or '90 Millimole per cubic decimeter to pmol/m3' or '88 mmol/dm3 to Picomole per cubic meter' or '84 Millimole per cubic decimeter into Picomole per cubic meter'. For this alternative, the calculator also figures out immediately into which unit the original value is specifically to be converted. Regardless which of these possibilities one uses, it saves one the cumbersome search for the appropriate listing in long selection lists with myriad categories and countless supported units. All of that is taken over for us by the calculator and it gets the job done in a fraction of a second.

Instead of '√16' you can also write 'sqrt 16'.
The mathematical functions atan, tan, sqrt, exp, pow, sin, cos, asin and acos can also be used. Example: sqrt(4), cos(pi/2), asin(1/2), 2 exp 3, atan(1/4), 3 pow 2, acos(1), sin(90), tan(90°) or sin(π/2)
Furthermore, the calculator makes it possible to use mathematical expressions. As a result, not only can numbers be reckoned with one another, such as, for example, '74 * 72 mmol/dm3'. But different units of measurement can also be coupled with one another directly in the conversion. That could, for example, look like this: '78 Millimole per cubic decimeter + 76 Picomole per cubic meter' or '70mm x 68cm x 66dm = ? cm^3'. The units of measure combined in this way naturally have to fit together and make sense in the combination in question.
If a check mark has been placed next to 'Numbers in scientific notation', the answer will appear as an exponential. For example, 1.462 740 727 429 8×1021. For this form of presentation, the number will be segmented into an exponent, here 21, and the actual number, here 1.462 740 727 429 8. For devices on which the possibilities for displaying numbers are limited, such as for example, pocket calculators, one also finds the way of writing numbers as 1.462 740 727 429 8E+21. In particular, this makes very large and very small numbers easier to read. If a check mark has not been placed at this spot, then the result is given in the customary way of writing numbers. For the above example, it would then look like this: 1 462 740 727 429 800 000 000. Independent of the presentation of the results, the maximum precision of this calculator is 14 places. That should be precise enough for most applications.
If required, the result can be rounded to a certain number of decimal places wherever it makes sense.
Instead of '4^3' you can also write '4 exp 3' or '4 pow 3'.